Blankets, Batts, Boards

Blanket Product

玻璃棉捲 

Sound Attenuation insulation – R products
Sound Attenuation Insulation is lightweight, flexible and resilient. They are designed for using in drywall partition to reduce sound transmission. The products also provide superior thermal performance which plays a vital role in conserving energy and operating cost savings on air-conditioning system. It has been tested for 1 hour fire rated 1/2” type X gypsum drywall assembly.

Density(Kg/m3)R4, R5, R6, R8, R11, R13, R19
Thickness (mm)38, 45, 50, 64, 89, 100, 150
Length (M)5 to 20
Width(mm)400, 600, 1200
* Other specs are available upon request

Lightweight Equipment Insulation
Available in the form of lightweight blankets,
Lightweight Equipment Insulation is designed for the
thermal insulation of industrial equipment.

Density(Kg/m3)32
Thickness (mm)25, 38, 50
Length (M)2.0, 2.3, 2.4
Width(mm)1200
* Other specs are available upon request

Building Insulation
Building insulation is lightweight, flexible and resilient. They provide excellent thermal insulation for flat or low-pitched roof using metal decking or asbestos-cement roofing sheet. In places where condensation exists, building blankets must be faced with a reflective aluminum foil vapour barrier.

Density(Kg/m3)14, 16, 20, 24, 32, 48, 56
Thickness (mm)25, 50, 75, 100, 150
Length (M)7.5, 15, 20
Width(mm)1200
* Other specs are available upon request



Segment (Batts)

玻璃棉片

Taita Segment is designed for use in house roof, wall and floor insulation. Segment works by reducing conduction, convection and radiation heat flow; keeping your house cooler in summer time and warmer in winter time. Hence, Segment products can efficiently reduce the energy costs up to 60% per household. For different customer requirements, Taita can also customize the water repellent segment as well as the requirement of different facing. Rigidity and resilience are guaranteed in Taita segment’s high-quality products. Taita Segment insulation products are available in R-value from R1.5 to R7.0.



Board Product


Intermediate Density Insulation
Available in the form of boards, intermediate Density Equipment Insulation is designed for the thermal insulation of industrial equipment.

Density(Kg/m3)48
Thickness (mm)25, 38, 50
Length (M)2
Width(mm)1200
* Other specs are available upon request

High Density Insulation
High Density Equipment Insulation consists of lightweight, rigid boards designed for the thermal insulation of industrial equipment, intended for use on flat faced equipment or on large-radius work where a rigid-type of insulation with good compressive strength is required.

Density(Kg/m3)80, 96, 100, 120
Thickness (mm)25, 38, 50, 75
Length (M)2
Width(mm)1200
* Other specs are available upon request